[nextpage title=”Introduction”]
This time we are testing the Prolimatech Megahalems Red Series, a CPU cooler with tower heatsink and six U-shaped heatpipes that supports one or two 120 mm or 140 mm fans. Check it out!
Some years ago, we tested the Megahalems Rev. B. Nowadays, Prolimatech offers the Megahalems Rev. C (silver-look heatsink), Megahalems Black Series, Megahalems Blue Series, and the Megahalems Red Series that we are testing. Aside from the aesthetics of the heatsink, they also differ because Rev. C and Black Edition models fit both AMD and Intel processors, while Red Series and Blue Series are compatible with Intel CPUs only.
Figure 1 shows the box of the Megahalems Red Series.
Figure 2 shows the contents of the box: heatsink, a syringe of PK-2 thermal compound, a manual, and installation hardware. This cooler does not come with any fan.
Figure 3 displays both the Megahalems Red Series and Blue Series. The only difference is the color, which is anodized on the heatsink.
Figure 3: Megahalems Blue and Red Series
This cooler is discussed in detail in the following pages.
[nextpage title=”The Megahalems Red Series”]
Figure 4 illustrates the front of the Megahalems Red Series. You will notice that, in fact, there are two independent heatsinks, one connected to each side of the heatpipes.
Figure 5 reveals the side of the cooler, where you can see the six heatpipes going to the base.
Figure 6 shows a top view of the cooler. The top fins are black, and there are caps at the tips of the heatpipes.
[nextpage title=”The Megahalems Red Series (Cont’d)”]
Figure 7 shows the view of the base of the cooler. There is a plate of nickel-plated copper soldered to the heatpipes, and the surface is smooth but with no mirror-like look.
We tested the Megahalems Red Edition with one Prolimatech Vortex Fan Aluminum Series, shown in Figure 8. This is a 140 mm fan with aluminum blades, with 1,600 rpm nominal speed, airflow of 127 cfm, 28 dBA noise level, and 5.4 W of power consumption.
Figure 9 unveils the Megahalems Red Series with the fan installed.
[nextpage title=”Installation”]
Figure 10 shows the backplate for use with Intel sockets LGA775, LGA1155, LGA1156, and LGA1366 processors, with the nuts installed. LGA2011 CPUs use the stock backplate. As previously mentioned, the reviewed cooler is not compatible with AMD CPUs.
Install the backplate on the solder side of the motherboard, and then the four spacers on the component side. Then put the two metal bars shown in Figure 11, holding them with four thumbnuts.
Figure 11: Metal bars installed
Put the heatsink over the CPU, and hold it in place with a third bar, fastening two screws at the first bars.
The last step is to install the fan or fans.
Figure 13: Installation finished
[nextpage title=”How we tested”]
We tested the cooler with a Core i5-2500K CPU (quad-core, 3.3 GHz), which is a socket LGA1155 processor with a 95 W TDP (Thermal Design Power). In order to get higher thermal dissipation, we overclocked it to 4.0 GHz (100 MHz base clock and x40 multiplier), with 1.3 V core voltage (Vcore). This CPU was able to reach 4.8 GHz with its default core voltage, but at this setting, the processor enters thermal throttling when using mainstream coolers, reducing the clock and thus the thermal dissipation. This could interfere with the temperature readings, so we chose to maintain a moderate overclocking.
We measured noise and temperature with the CPU under full load. In order to get 100% CPU usage in all cores, we ran Prime 95 25.11 with the “In-place Large FFTs” option. (In this version, the software uses all available threads.)
We compared the tested cooler to other coolers we already tested, and to the stock cooler that comes with the Core i5-2500K CPU. Note that the results cannot be compared to measures taken on a different hardware configuration, so we retested some “old” coolers with this new methodology. This means you can find different values in older reviews than the values you will read on the next page. Every cooler was tested with the thermal compound that comes with it.
Room temperature measurements were taken with a digital thermometer. The core temperature was read with the SpeedFan program (available from the CPU thermal sensors), using an arithmetic average of the core temperature readings.
During the tests, the panels of the computer case were closed. The front and rear case fans were spinning at minimum speed in order to simulate the “normal” cooler use on a well-ventilated case. We assume that is the common setup used by a cooling enthusiast or overclocker.
The sound pressure level (SPL) was measured with a digital noise meter, with its sensor placed near the top opening of the case. This measurement is only for comparison purposes, because a precise SPL measurement needs to be made inside an acoustically insulated room with no other noise sources, which is not the case here.
Hardware Configuration
- Processor: Core i5-2500K
- Motherboard: ASUS Maximus IV Extreme-Z
- Memory: 16 GB G.Skill Sniper (DDR3-1600/PC3-12800), configured at 1,600 MHz
- Hard disk: Seagate Barracuda XT 2 TB
- Video card: Point of View GeForce GTX 460 1 GB
- Video resolution: 1920×1080
- Video monitor: Samsung SyncMaster P2470HN
- Power supply: Seventeam ST-550P-AM
- Case: Cooler Master HAF 922
Operating System Configuration
- Windows 7 Home Premium 64 bit SP1
Software Used
Error Margin
We adopted a 2°C error margin, meaning temperature differences below 2°C are considered irrelevant.
[nextpage title=”Our Tests”]
The table below presents the results of our measurements. We repeated the same test on all coolers listed below. Each measurement was taken with the CPU at full load. In the models with a fan supporting PWM, the motherboard controlled the fan speed according to core load and temperature. On coolers with an integrated fan controller, the fan was set at the full speed.
Cooler | Room Temp. | Noise | Speed | Core Temp. | Temp. Diff. |
Cooler Master Hyper TX3 | 18 °C | 50 dBA | 2850 rpm | 69 ºC | 51 °C |
Corsair A70 | 23 °C | 51 dBA | 2000 rpm | 66 ºC | 43 °C |
Corsair H100 | 26 °C | 62 dBA | 2000 rpm | 64 ºC | 38 °C |
EVGA Superclock | 26 °C | 57 dBA | 2550 rpm | 67 ºC | 41 °C |
NZXT HAVIK 140 | 20 °C | 46 dBA | 1250 rpm | 65 ºC | 45 °C |
Thermalright True Spirit 120 | 26 °C | 42 dBA | 1500 rpm | 82 °C | 56 °C |
Zalman CNPS12X | 26 °C | 43 dBA | 1200 rpm | 71 °C | 45 °C |
Zalman CNPS9900 Max | 20 °C | 51 dBA | 1700 rpm | 62 °C | 42 °C |
Titan Fenrir Siberia Edition | 22 °C | 50 dBA | 2400 rpm | 65 °C | 43 °C |
SilenX EFZ-120HA5 | 18 °C | 44 dBA | 1500 rpm | 70 °C | 52 °C |
Noctua NH-L12 | 20 °C | 44 dBA | 1450 rpm | 70 °C | 50 °C |
Zalman CNPS8900 Extreme | 21 °C | 53 dBA | 2550 rpm | 71 °C | 50 °C |
Gamer Storm Assassin | 15 °C | 48 dBA | 1450 rpm | 58 °C | 43 °C |
Deepcool Gammaxx 400 | 15 °C | 44 dBA | 1500 rpm | 60 °C | 45 °C |
Cooler Master TPC 812 | 23 °C | 51 dBA | 2350 rpm | 66 °C | 43 °C |
Deepcool Gammaxx 300 | 18 °C | 43 dBA | 1650 rpm | 74 °C | 56 °C |
Intel stock cooler | 18 °C | 41 dBA | 2000 rpm | 97 °C | 79 °C |
Xigmatek Praeton | 19 °C | 52 dBA | 2900 rpm | 83 °C | 64 °C |
Noctua NH-U12P SE2 | 18 °C | 42 dBA | 1300 rpm | 69 °C | 51 °C |
Deepcool Frostwin | 24 °C | 46 dBA | 1650 rpm | 78 °C | 54 °C |
Thermaltake Frio Advanced | 13 °C | 56 dBA | 2000 rpm | 62 °C | 49 °C |
Xigmatek Dark Knight Night Hawk Edition | 9 °C | 48 dBA | 2100 rpm | 53 °C | 44 °C |
Thermaltake Frio Extreme | 21 °C | 53 dBA | 1750 rpm | 59 °C | 38 °C |
Noctua NH-U9B SE2 | 12 °C | 44 dBA | 1700 rpm | 64 °C | 52 °C |
Thermaltake WATER2.0 Pro | 15 °C | 54 dBA | 2000 rpm | 52 °C | 37 °C |
Deepcool Fiend Shark | 18 °C | 45 dBA | 1500 rpm | 74 °C | 56 °C |
Arctic Freezer i30 | 13 °C | 42 dBA | 1350 rpm | 63 °C | 50 °C |
Spire TME III | 8 °C | 46 dBA | 1700 rpm | 70 °C | 62 °C |
Thermaltake WATER2.0 Performer | 11 °C | 54 dBA | 2000 rpm | 49 °C | 38 °C |
Arctic Alpine 11 PLUS | 11 °C | 45 dBA | 2000 rpm | 82 °C | 71 °C |
be quiet! Dark Rock 2 | 10 °C | 41 dBA | 1300 rpm | 58 °C | 48 °C |
Phanteks PH-TC14CS | 16 °C | 47 dBA | 1300 rpm | 58 °C | 42 °C |
Phanteks PH-TC14PE | 16 °C | 48 dBA | 1300 rpm | 57 °C | 41 °C |
SilverStone HE01 (Q) | 19 °C | 44 dBA | 1150 rpm | 63 °C | 44 °C |
SilverStone HE01 (P) | 20 °C | 57 dBA | 2050 rpm | 62 °C | 42 °C |
Thermaltake WATER2.0 Extreme (S) | 17 °C | 44 dBA | 1250 rpm | 52 °C | 35 °C |
Thermaltake WATER2.0 Extreme (E) | 17 °C | 53 dBA | 1900 rpm | 50 °C | 33 °C |
Deepcool Neptwin | 11 °C | 46 dBA | 1500 rpm | 56 °C | 45 °C |
SilverStone HE02 | 19 °C | 49 dBA | 2000 rpm | 64 °C | 45 °C |
Zalman CNPS9900DF | 23 °C | 45 dBA | 1400 rpm | 68 °C | 45 °C |
Deepcool ICE BLADE PRO V2.0 | 22 °C | 43 dBA | 1500 rpm | 67 °C | 45 °C |
Phanteks PH-TC90LS | 24 °C | 47 dBA | 2600 rpm | 95 °C | 71 °C |
Rosewill AIOLOS | 20 °C | 40 dBA | 1600 rpm | 94 °C | 74 °C |
Corsair H60 | 20 °C | 49 dBA | 2000 rpm | 64 °C | 44 °C |
Zalman LQ310 | 27 °C | 51 dBA | 2050 rpm | 65 °C | 38 °C |
Noctua NH-L9i | 24 °C | 44 dBA | 2500 rpm | 95 °C | 71 °C |
NZXT Respire T40 | 20 °C | 45 dBA | 1850 rpm | 76 °C | 56 °C |
NZXT Respire T20 | 21 °C | 45 dBA | 1900 rpm | 77 °C | 56 °C |
Zalman LQ315 | 20 °C | 52 dBA | 1950 rpm | 57 °C | 37 °C |
Corsair H80i (Quiet) | 19 °C | 44 dBA | 1100 rpm | 61 °C | 42 °C |
Corsair H80i (Maximum) | 19 °C | 57 dBA | 2500 rpm | 55 °C | 36 °C |
NZXT Kraken X40 (Silent) | 25 °C | 44 dBA | 1050 rpm | 66 °C | 41 °C |
NZXT Kraken X40 (Extreme) | 25 °C | 53 dBA | 1650 rpm | 62 °C | 37 °C |
Zalman LQ320 | 20 °C | 52 dBA | 2100 rpm | 57 °C | 37 °C |
Corsair H100i (Quiet) | 22 °C | 45 dBA | 1150 rpm | 58 °C | 36 °C |
Corsair H100i (Maximum) | 22 °C | 61 dBA | 2500 rpm | 54 °C | 32 °C |
NZXT Kraken X60 (Silent) | 26 °C | 46 dBA | 1000 rpm | 62 °C | 36 °C |
NZXT Kraken X60 (Extreme) | 26 °C | 60 dBA | 1650 rpm | 60 °C | 34 °C |
Prolimatech Genesis Black Series | 25 °C | 46 dBA | 1150 rpm | 69 °C | 44 °C |
Phanteks PH-TC12DX | 25 °C | 51 dBA | 1850 rpm | 74 °C | 49 °C |
Corsair H90 | 23 °C | 51 dBA | 1550 rpm | 61 °C | 38 °C |
Corsair H110 | 27 °C | 58 dBA | 1500 rpm | 60 °C | 33 °C |
Evercool Venti | 23 °C | 49 dBA | 2250 rpm | 72 °C | 49 °C |
Thermalright Archon SB-E X2 | 22 °C | 45 dBA | 1400 rpm | 68 °C | 46 °C |
Scythe Kabuto II | 20 °C | 41 dBA | 1450 rpm | 67 °C | 47 °C |
Prolimatech Megahalems Red Series | 20 °C | 51 dBA | 1500 rpm | 63 °C | 43 °C |
In the graph below, you can see how many degrees Celsius hotter the CPU core is than the air outside the case. The lower this difference, the better is the performance of the cooler.
In the graph below, you can see how many decibels of noise each cooler makes.
[nextpage title=”Main Specifications”]
The main specifications for the Prolimatech Megahalems Red Series CPU cooler include:
- Application: Sockets LGA775, LGA1155, LGA1156, LGA1366, and LGA2011
- Dimensions: 5.1 x 2.9 x 6.2 inches (130 x 74 x 158.7 mm) (W x L x H)
- Fins: Aluminum
- Base: Nickel-plated copper
- Heat-pipes: Six 6 mm copper heatpipes
- Fans: One or two, 120 mm or 140 mm (not included)
- Nominal fan speed: NA
- Fan air flow: NA
- Power consumption: NA
- Nominal noise level: NA
- Weight: 1.74 lb (790 g)
- More information: https://www.prolimatech.com
- Average price in the U.S.*: USD 70.00
* Researched at Newegg.com on the day we published this review.
[nextpage title=”Conclusions”]
The Prolimatech Megahalems Rev. B was, at the time we tested it, one of the best CPU coolers available on the market. Nowadays, the Red Edition has a few competitors with slightly better performance, but the Megahalems name is still a synonym with high-end cooler.
In our tests, the Megahalems Red Edition performed very well, standing among the best air coolers we tested, even using only one fan. With two fans, it may perform even better.
Its construction is excellent and it looks great inside the case.
For all those qualities, the Prolimatech Megahalems receives the Hardware Secrets Silver Award.
Leave a Reply