3R System L-600 V.REX Jr. Case Review

The Top, Bottom and Rear Panels

The top panel of the L-600 can be seen in Figure 7. It features two 120 mm fans. No technical details about them were provided.

Figure 7: Top panel

The bottom panel, see in Figure 8, features two removable air filters, one for the power supply fan and one for the air intake available below the hard disk drive cage.

Figure 8: Bottom panel

In Figure 9, you can see the rear panel of the L-600. The two blue cables are connected to the USB 3.0 ports, and must be installed on the USB 3.0 ports available on the rear panel of the motherboard. Different from most cases, the L-600 comes with an 80 mm fan instead of a 120 mm model (no technical details about this fan were provided). The power supply is installed at the bottom of the case, and the rear panel and the interior of the case are painted black, features usually found only on more expensive products. The L-600 has seven expansion slots, and on five of them you will need to break and discard the cover that comes attached to them, as expected to be seen in low-cost cases. The case also features a tab for installing a pad lock or a warranty seal to prevent unauthorized people from opening the case.

Figure 9: Rear panel

Let’s now take a look inside the L-600 V.REX Jr.