3R System L-900 V.REX F8 Case Review

The Bottom and Rear Panels

As already mentioned, unlike other cases from this brand, there are no extra features on the top panel of the L-900. The bottom panel, seen in Figure 7, is identical to the bottom panel of the L-600 and L-1200, featuring two removable air filters, one for the power supply fan and one for the air intake available below the hard disk drive cage.

Figure 7: Bottom panel

In Figure 8, you can see the rear panel of the L-900. The rear panel and the interior of this case are painted black, giving it a very professional look. The power supply is installed at the bottom part of the case.

There is one 120 mm fan (3R System Omega C90F-738H) at the rear panel, using a standard peripheral power connector, so you can’t monitor its speed.

The L-900 has seven expansion slots that come with solid covers, but at least they are reusable, meaning that you don’t need to break anything to open a slot.

Figure 8: Rear panel

The L-900 comes with a tab for you to install a padlock or a warranty seal in order to prevent people from opening the computer.

Figure 9: Tab for padlock or warranty seal

Let’s now take a look inside the L-900 V.REX F8.