Aerocool E80-600 Power Supply Review

Transient Filtering Stage

As we have mentioned in other articles and reviews, the first place we look when opening a power supply for a hint about its quality, is its filtering stage. The recommended components for this stage are two ferrite coils, two ceramic capacitors (Y capacitors, usually blue), one metalized polyester capacitor (X capacitor), and one MOV (Metal-Oxide Varistor). Very low-end power supplies use fewer components, usually removing the MOV and the first coil.

This power supply has all the minimum required components plus two additional Y capacitors and two additional X capacitors. The MOV is located behind the first X capacitor in Figure 9 (CX3) and, thus, can’t be seen in this picture.

Figure 8: Transient filtering stage (part 1)

Figure 9: Transient filtering stage (part 2)

In the next page we will have a more detailed discussion about the components used in the Aerocool E80-600.