Antec EarthWatts 500 W Power Supply Review
Transient Filtering Stage
Contents
As we have mentioned in other articles and reviews, the first place we look when opening a power supply for a hint about its quality, is its filtering stage. The recommended components for this stage are two ferrite coils, two ceramic capacitors (Y capacitors, usually blue), one metalized polyester capacitor (X capacitor), and one MOV (Metal-Oxide Varistor). Very low-end power supplies use fewer components than that, usually removing the MOV, which is essential for cutting spikes coming from the power grid, and the first coil.
On this section this power supply is flawless, as it has more components than the necessary – one extra X capacitors, one extra coil and a ferrite bead on the main AC cable. It also provides one X capacitor and two Y capacitors after the rectifying bridge.
Figure 6: Transient filtering stage (part 1).
Figure 7: Transient filtering stage (part 2).
In the next page we will have a more detailed discussion about the components used in the EarthWatts 500 W.