Antec High Current Gamer M 620 W Power Supply Review
Main Specifications
Contents
Below you can see the maximum we could pull from this power supply. The objective of this test is to see if the power supply has its protection circuits working properly. The unit passed this test, as we couldn’t pull more than shown in the table below because the power supply would shut down, showing that its protections are present and working fine. During this extreme configuration, noise and ripple levels were still extremely low, and voltages were still within three percent of their nominal values.
| Input | Overload Test |
| +12VA | 25 A (300 W) |
| +12VB | 25 A (300 W) |
| +5 V | 12 A (60 W) |
| +3.3 V | 12 A (39.6 W) |
| +5VSB | 3 A (15 W) |
| -12 V | 0.5 A (6 W) |
| Total | 714.2 W |
| % Max Load | 115.2% |
| Room Temp. | 45.6° C |
| PSU Temp. | 42.8° C |
| AC Power | 899 W |
| Efficiency | 79.4% |
| AC Voltage | 111.1 V |
| Power Factor | 0.995 |