Antec Sonata Plus 550 Case Review

Removing the Frontal Panel

For installing drives on this case you need to remove its frontal panel. To do that, simply pull the three plastic latches that hold the panel to the case, see Figure 13. Then the frontal panel will swing to your right-hand side, as shown in Figure 14. The interesting thing is that you can remove the panel by just lifting it, as shown in Figure 15.

Figure 13: Pull these three latches to remove the frontal panel.

Figure 14: Opening the frontal panel.

Figure 15: Just lift the frontal panel if you want to remove it completely from the case.

In Figure 16, you can see the front of the case without its plastic frontal panel and there is a lot to talk about it.

Figure 16: Front of the case without the plastic frontal panel.

As you can see there is dust filter in front of the hard disk drives cage. This dust filter can be removed for cleaning (Figure 17).

Figure 17: Dust filter.