Antec Three Hundred Case Review
Inside Three Hundred
Contents
In Figure 7 you have an overall look from the interior of this case. Even though you can remove the right side panel, the motherboard tray is permanently attached to the chassis.
Figure 7: Inside Three Hundred.
This case doesn’t use a screwless mechanism to fasten daughterboards to the case nor thumbscrews. In Figure 8, you can see the rear 120 mm fan. Both the rear and the top fans have a three-speed controller attached, see Figure 9. These two fans use a standard 4-pin peripheral power connector, so they must be installed directly on the power supply and not on the motherboard.
Figure 8: Rear 120 mm fan, expansion slots and place for installing the power supply.
Figure 9: Speed controller.