Arctic Freezer i30 CPU Cooler Review
Installation
Contents
Figure 11 shows the backplate for installing the Freezer i30 on socket LGA1155/1156 CPUs. Socket LGA2011 systems don’t require a backplate.
Figure 11: Backplate
In order to install the Freezer i30, you need to put the backplate on the solder side of the motherboard, and then install the holders shown in Figure 12, using four plastic spacers.
Figure 12: Holders installed
After that, install the heatsink, securing it with two screws.
Figure 13: Holders
The last step is to install the fan, as you can see in Figure 14.
Figure 14: Installation finished