be quiet! Dark Power Pro 10 650 W Power Supply Review

Main Specifications

The main specifications for the be quiet! Dark Power Pro 10 650 W power supply include:

• Standards: ATX12V 2.31 and EPS12V 2.92
• Nominal labeled power: 650 W
• Measured maximum power: 692.8 W at 47° C
• Labeled efficiency: Up to 94%, 80% Plus Gold certification, 87% minimum at light (i.e., 20%) and full loads, and 90% minimum at typical (i.e., 50%) load
• Measured efficiency: Between 87.6% and 90.3%, at 115 V (nominal, see complete results for actual voltage)
• Active PFC: Yes
• Modular Cabling System: Yes
• Motherboard Power Connectors: One 20/24-pin connector, one connector with two ATX12V connectors that together form an EPS12V connector, and one connector with two cables, one with two ATX12V connectors that together form an EPS12V connector and one with one EPS12V connector
• Video Card Power Connectors: Five six/eight-pin connectors on separate cables
• SATA Power Connectors: Nine on four cables
• Peripheral Power Connectors: Seven on four cables
• Floppy Disk Drive Power Connectors: One
• Protections (as listed by the manufacturer): Over voltage (OVP), under voltage (UVP), over current (OCP), over power (OPP), and short-circuit (SCP)
• Are the above protections really available? Yes.
• Warranty: Five years
• More Information: https://www.bequiet.com
• MSRP in the U.S.: USD 150.00