be quiet! Dark Power Pro 10 850 W Power Supply Review

Main Specifications

The main specifications for the be quiet! Dark Power Pro 10 850 W power supply include:

• Standards: ATX12V 2.31 and EPS12V 2.92
• Nominal labeled power: 850 W continuous, 950 W peak at 40° C
• Measured maximum power: 985.6 W at 44.4° C (burned)
• Labeled efficiency: Up to 94% at 230 V, 80% Plus Platinum certification, 90% minimum at light (i.e., 20%) load, 92% minimum at typical (i.e., 50%) load, and 89% minimum at full load
• Measured efficiency: Between 88.1% and 91.4%, at 115 V (nominal, see complete results for actual voltage)
• Active PFC: Yes
• Modular Cabling System: Yes
• Motherboard Power Connectors: One 20/24-pin connector, one cable with two ATX12V connectors that together form an EPS12V connector, one cable with one ATX12V connector, and one connector with two cables: one with two ATX12V connectors that together form an EPS12V connector and one with one EPS12V connector
• Video Card Power Connectors: Six six/eight-pin connectors and one six-pin connector on separate cables
• SATA Power Connectors: 12 on five cables
• Peripheral Power Connectors: Nine on five cables
• Floppy Disk Drive Power Connectors: Two on two cables
• Protections (as listed by the manufacturer): Over voltage (OVP), under voltage (UVP), over current (OCP), over power (OPP), over temperature (OTP), and short-circuit (SCP)
• Are the above protections really available? No. The over power protection (OPP) failed in our tests.
• Warranty: Five years
• Extra Features: Single/multiple +12 V rail switch, four cables for fans
• Real Manufacturer: Seasonic
• More Information: https://www.bequiet.com
• MSRP in the U.S.: USD 220