BitFenix Ronin Case Review

The Front Panel

The front panel of the BitFenix Ronin has three 5.25” bays with solid covers. The lower half of the panel is meshed, and there are two strips of metal (also meshed) at the sides.

Figure 3: Front panel

The front panel can be easily removed just by pulling it. The front of the case’s metal structure can be seen in Figure 4. There is space for two 120 mm fans at the lower section, but only one of them (1000 rpm, 20 dBA, 43.5 cfm, 1.2 W) comes with the case, with an air filter. The case comes with a spare filter for use with the second fan, if you install one.

Figure 4: Front panel removed

Figure 5 shows the inner side of the front panel.

Figure 5: Front panel