CM Storm Enforcer Case Review
Inside the CM Storm Enforcer
Contents
Only the left-side panel is fastened to the case using black thumbscrews; the right-side panel uses regular black screws. The motherboard tray has a huge hole for you to access the backplate of the CPU cooler without having to remove the motherboard from the case, several holes for you to route cables behind it, and several metallic clips for you to fasten cables behind the motherboard tray using cable ties.
Figure 12: Overall look
Figure 13: A view behind the motherboard tray
In Figure 14, you have another overall look inside the case. Expansion cards are fastened to the case using regular screws. The Enforcer supports video cards up to 10.6” (270 mm) long or up to 15.4” (390 mm) long, if the top hard drive cage is removed, and CPU coolers up to 6.9” (175 mm) tall.
Note that the power supply can be installed with either its bottom fan facing up or facing down, so you can decide if you want the fan of your power supply pulling air from inside the case or from outside of it. As already shown, there is an air filter for the power supply fan.
Figure 15: Power supply compartment