Cogage Arrow CPU Cooler Review

Installation

To install the Arrow, first you need to put the backplate on the solder side of the motherboard, and then screw both the clips on the component side, as you can see in Figure 10.

Figure 10: Clips

Then, just apply thermal compound on the CPU, put the cooler over it, and hold it by screwing the metal bar to the clips.

Figure 11: Installed on the motherboard

Finally, just install the fan (or fans).

Figure 12: Fan installed

In Figure 13, you can see the cooler installed in our case.

Figure 13: Installed in our case