Cooler Master Hyper 212 EVO CPU Cooler Review
Installation
Contents
Figure 11 presents the universal backplate (at the left) and the scissor-like clip that is used both on Intel and AMD processors (at the right). On the bottom are the screws that hold the cooler.
Figure 11: Backplate and clip
The backplate must be inserted from the solder side of the motherboard and then held in place by the screws and four nuts, as shown in Figure 12.
Figure 12: Backplate installed
On the component side, you can see the pieces where the scissor clip is screwed.
Figure 13: Ready for cooler installation
Then install the cooler, as shown in Figure 14.
Figure 14: Heatsink installed
The last step is to install the fan.
Figure 15: Fan installed