Cooler Master Hyper 212 Plus CPU Cooler Review
Installation (Cont'd)
Contents
The Hyper 212 Plus comes with the fan already in place, but you must remove it in order to screw the cooler to the previously installed holder.
Figure 15: Installed on our motherboard.
After attaching the cooler to the base, you must put the fan back in place, which is a very simple task: you just need to push it into place.
Figure 16: Installed on our motherboard.
In Figure 17, you can see the cooler installed in our case.
Figure 17: Installed inside our case.
