Cooler Master Nepton 240M CPU Cooler Review
Installation
Contents
The installation of the Cooler Master Nepton 240M is simple. You must attach to the block the holders according to your CPU and, except for the LGA2011 and LGA2011-v3 CPUs, install the screws at the backplate.
Figure 9 shows the backplate and AMD holders.
Figure 9: backplate and holders for AMD system
Figure 10 shows the base of the block with the holders for Intel CPUs installed.
Figure 10: Intel holders installed
The last step is to install the radiator and the fans at the top panel of your case, and secure the block over the CPU. We installed the fans outside, blowing outwards.
Figure 11: installation concluded