Cooler Master TPC 812 CPU Cooler Review
The Cooler Master TPC 812 (Cont’d)
Contents
Figure 7 shows the six U-shaped, nickel-plated heatpipes found on the TPC 812. The heatpipes are disposed on two rows inside each half of the heatsink, but they are on a single line on the base of the cooler.
Figure 7: Heatpipes
The vapor chambers can be seen in Figure 8. Each vapor chamber goes to one side of the heatsink. Notice that the vapor chambers stay over the heatpipes.
Figure 8: Vapor chambers
The base of the cooler is a nickel-plated copper plate that is soldered to the heatpipes. It is nicely polished for a mirrored look.
Figure 9: Base
The 120 mm black fan is mounted on a plastic frame that makes it very easy to remove and install. The four-pin connector shows that this fan is PWM compatible.
Figure 10: Fan