Corsair Carbide 300R Case Review

The Top, Bottom, and Rear Panels

The top panel of the Carbide 300R supports two 120 mm or 140 mm fans. The bottom panel has an air filter for the power supply fan. This filter is removed from the rear panel.

Figure 7: Top panel

Figure 8: Bottom panel

Figure 9: Removing the air filter for the power supply

The rear panel and the interior of the Corsair Carbide 300R are painted black.

On the Corsair Carbide 300R, the power supply is installed at the bottom of the case.

The case comes with a 120 mm fan installed on its rear panel, with a standard three-pin fan power connector. Again, the manufacturer doesn’t publish technical specifications for this fan.

This case has seven expansion slots with vented covers. These covers are reusable.

There are three holes for hoses of liquid cooling solutions, measuring 0.8” (20 mm) in diameter. You need to break the metallic covers that come attached if you want to use them.

Figure 10: Rear panel

Let’s now take a look inside the Corsair Carbide 300R.