Corsair TX750M Power Supply Review

Overload Tests

Below you can see the maximum we could pull from this power supply. We couldn’t pull more than that because the power supply shut down, showing that its protections were working well. During this test, the +3.3 V output exited the tighter 3% regulation, at +3.17 V, still inside the proper range. Ripple and noise levels were still low, but on the -12 V, which increased to 92.2 mV.

Input Overload Test
+12VA 30 A (360 W)
+12VB 30 A (360 W)
+5 V 20 A (100 W)
+3.3 V 20 A (66 W)
+5VSB 3 A (15 W)
-12 V 0.5 A (6 W)
Total 890.5 W
% Max Load 118.7%
Room Temp. 44.4° C
PSU Temp. 49.8° C
AC Power 1,158 W
Efficiency 76.9%
AC Voltage 103.3 V
Power Factor 0.998

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *