Installation
Contents
Figure 11 shows the backplate for installing the Frostwin on AMD and Intel CPUs, with the screws inserted in the holes for socket LGA1155.
Figure 11: Backplate
Put the backplate on the solder side of the motherboard, and then install the metal bars shown in Figure 12.
Figure 12: Metal frame
Put the cooler in place and secure it by installing a transversal bar, attaching it to the other ones with two spring-loaded screws. In order to grant access to those screws, you have to remove the fan located between the two heatsinks.
Figure 13: Heatsink installed
The last step is to reinstall the fan that comes in between the heatsinks, as shown in Figure 14.
Figure 14: Installation finished
Leave a Reply