Deepcool Gamer Storm CPU Cooler Review
Installation
Contents
Before installing the Gamer Storm, you need to attach two clips to its base. In Figure 10, you can check the clips for Intel processors in place. They are attached to the cooler with one thumbscrew each, but these thumbscrews are hard to fasten if you don’t have small fingers.
Figure 12: Clips attached to the base
After installing the clips, put the backplate on the solder side of the motherboard and fasten it in place with four thumbnuts. Then just screw the cooler in these thumbnuts.
Figure 13: The heatsink installed
In Figure 14, you can see the Gamer Storm installed in our case, with the fan installed.
Figure 14: The Gamer Storm installed in our case