Deepcool ICE BLADE PRO V2.0 CPU Cooler Review
Installation
Contents
To install the Deepcool ICE BLADE PRO V2.0, first prepare the backplate. You must install the four screws in the holes that match your CPU socket, and then place it on the solder side of the motherboard. Figure 10 shows the backplate with the screws installed in the socket LGA1155 position.
Figure 10: Backplate with screws
After that, install four spacers, and then the metal bars shown in Figure 11, holding them with four thumbnuts.
Figure 11: Metal bars installed
Place the heatsink over the CPU and hold it, fastening the two screws at the transversal bar.
Figure 12: Heatsink installed
The last step is to install the fan, as shown in Figure 13.
Figure 13: Installation finished