Enermax ETS-T40-White Cluster CPU Cooler Review
Installation
Contents
Figure 12 shows the backplate for use with AMD and Intel processors. The threaded holes on the “Intel side” are compatible with sockets LGA775, LGA1155, LGA1156, and LGA1366 CPUs. Socket LGA2011 systems will use the stock mounting system, and AMD systems use the other side of the backplate.
Figure 12: Backplate
Put the backplate on the solder side of the motherboard and screw four spacers (shown in Figure 13) by the component side. Then, install the two bars shown in Figure 14.
Figure 13: Spacers installed
Figure 14: Metal bars installed
Then, install the heatsink over the CPU, holding it with two nuts and a transversal bar.
Figure 15: Heatsink installed
Finally, install the fan.
Figure 16: Fan installed
