Enermax Platimax 600 W Power Supply Review
Overload Tests
Contents
Below you can see t
he maximum we could pull from this power supply. We couldn’t pull more than that because the power supply shut down, showing that its protections were working well. During this test, the +5 V and +3.3 V outputs were outside the tighter 3% regulation, at +4.81 V and +3.11 V, respectively. As you can see, the +3.3 V output was below the minimum allowed (+3.135 V). Ripple and noise levels were still very low, and efficiency was still very high.
| Input | Overload Test |
| +12VA | 27 A (324 W) |
| +12VB | 27 A (324 W) |
| +5 V | 12 A (60 W) |
| +3.3 V | 12 A (39.6 W) |
| +5VSB | 3 A (15 W) |
| -12 V | 0.5 A (6 W) |
| Total | 762.4 W |
| % Max Load | 127.1% |
| Room Temp. | 48.2° C |
| PSU Temp. | 49.8° C |
| AC Power | 867 W |
| Efficiency | 87.9% |
| AC Voltage | 108.4 V |
| Power Factor | 0.993 |