Evercool Venti CPU Cooler Review
Installation
Contents
Figure 10 shows the backplate for use with AMD and Intel processors, while Figure 11 shows the base of the cooler with the holders for Intel CPUs fastened.
Figure 10: Backplate
Figure 11: Holders installed
You need to hold the backplate in place and insert four screws from the solder side of the motherboard. In Figure 12, you can see the four nuts where the screws are fastened, installed from the component side.
Figure 12: Nuts installed
Put the cooler in place, and attach it to the nuts using four spring-loaded screws.
Figure 13: Installation finished
The last step is to install the fan, as shown in Figure 14.
Figure 14: Installation finished