Gigabyte A75M-UD2H Motherboard

Main Specifications

The main specifications for the Gigabyte A75M-UD2H motherboard include:

  • Socket: FM1
  • Chipset: AMD A75
  • Super I/O: ITE IT8720F
  • Parallel ATA: None
  • Serial ATA: Five SATA-600 ports controlled by the chipset (RAID 0, 1, and 10)
  • External SATA: One eSATA-600 port controlled by the chipset
  • USB 2.0: Eight USB 2.0 ports, four soldered on the motherboard rear panel and four available through two headers on the motherboard
  • USB 3.0: Four ports, two soldered on the motherboard rear panel and two available through one header on the motherboard, controlled by the chipset
  • FireWire (IEEE 1394): Two ports, one soldered on the motherboard rear panel and one available through a header on the motherboard, controlled by a VIA VT6308P chip
  • On-board video: Yes, controlled by the CPU; VGA, DVI-D, HDMI, and DisplayPort connectors
  • On-board audio: Produced by the chipset together with a Realtek ALC889 codec (eight channels, 24-bit resolution, up to 192 KHz sampling rate for both the inputs and outputs, 104 dB signal-to-noise ratio for the inputs and 108 dB signal-to-noise ratio for the outputs), on-board optical SPDIF output
  • On-board LAN: One Gigabit Ethernet port controlled by a Realtek RTL8111E chip
  • Buzzer: No
  • Infrared interface: No
  • Power supply required: ATX12V
  • Slots: Two PCI Express 2.0 x16 slots (x16/x4), one PCI Express x1 slot, and one standard PCI slot
  • Memory: Four DDR3-DIMM sockets (up to DDR3-1866, 32 GB maximum)
  • Fan connectors: One four-pin connector for the CPU cooler and one four-pin connector for an auxiliary fan
  • Extra Features: Legacy parallel port, legacy serial port, support for TPM, two BIOS chips
  • Number of CDs/DVDs provided: One
  • Programs included: Motherboard utilities
  • More Information: https://www.gigabyte.com
  • Average price in the US*: USD 110.00

* Researched at Newegg.com on the day we published this First Look article.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *