In Win GRone Case Review

The Disk Drive Bays

The In Win GRone case has three 5.25” external bays, eight 3.5”/2.5” internal bays, and one 3.5”/2.5” external docking bay. Installation of 5.25”, 3.5”, and external 2.5” devices can be done without the use of tools or screws.

Figure 18: Disk drive bays

The case has two hard drive cages. The upper one has five 3.5”/2.5” bays, and the bottom one has three 3.5”/2.5” bays. You can remove the top cage if you want to improve airflow inside the computer. Furthermore, you can remove the bottom cage if you either want to improve airflow inside the computer or want to install a fan or radiator on the bottom panel that is thicker than 1” (25 mm).

Figure 19: The case with its top hard drive cage removed

Figure 20: The case with its bottom hard drive cage removed

Figure 21: The case with both hard drive cages removed

Each 3.5”/2.5” bay is actually a small drawer with rubber rings to reduce the vibration and noise produced by 3.5” hard drives.

Figure 22: One of the 3.5”/2.5” bays