Lian Li PC-X2000F Case Review

Inside the Lian Li PC-X2000F

The side panels of the PC-X2000F are removed by unscrewing a thumbscrew and then pulling the tab where the screw is located. The left-side tab comes with a hole for you to install a padlock or a warranty seal.

Figure 11: Opening system

Both side panels come with foams attached, in order to redu
ce the noise level produced by the computer.

Figure 12: Dampening foam on the side panel

In Figure 13, you can see inside the Lian Li PC-X2000F. The interior of the case is divided into two compartments. On the top of the case we have the 5.25” bays and the upper hard drive cage, while on the bottom of the case we have the motherboard tray. The top compartment is cooled by the top rear fan, while the bottom compartment is cooled by the other four fans.

The motherboard tray has a big hole around the area where the CPU is installed, allowing access to the backplate of the CPU cooler, so you can replace the cooler without having to remove the motherboard. The motherboard tray has several holes, allowing you to easily route and hide cables behind the tray.

Figure 13: Overall look

Figure 14: A view behind the motherboard tray