NZXT Kraken X60 CPU Cooler Review

Installation

In Figure 10, you can see the backplate with nuts (at the left) and the frame with screws (at the right) mounted for use with sockets LGA1155, LGA1156, LGA1366, and LGA2011. There is a similar set of parts for use with AMD processors. Figure 11 shows the frame mounted on the block.

Figure 10: Mounting hardware for Intel CPUs

Figure 11: Frame assembled

After assembling the frame on the block, install the system inside your case. Figure 12 shows the Kraken X60 installed in our system, with the radiator at the top panel of the case. Depending on your case, you may be able to fit the radiator on the bottom panel or on the front panel.

Figure 12: Installation finished

The software that controls the Kraken X60 comes with the product. The fans can be configured for three operating modes: Extreme, Silent, or Custom, where you can program a fan power versus temperature curve. The color of the LEDs at the block can also be configured. Figure 13 shows the application screen.

Figure 13: Application screen

We tested the Kraken X60 in two modes: Silent and Extreme.