OCZ Fatal1ty 750 W Power Supply Review

Main Specifications

OCZ Fatal1ty 750 W power supply specs include:

• ATX12V 2.3
• EPS12V 2.92
• Nominal labeled power: 750 W at 45° C.
• Measured maximum power: 980 W (burned after a few seconds).
• Labeled efficiency: 85% at typical load (i.e., 50% load, 375 W), 80 Plus Bronze certified (82% minimum at 20% and 100% loads; 85% minimum at 50% load).
• Measured efficiency: Between 81.6% and 85.3% at 115 V (nominal, see complete results for actual voltage).
• Active PFC: Yes.
• Modular Cabling System: Yes, partial.
• Motherboard Power Connectors: One 20/24-pin connector, two ATX12V connectors that together form another EPS12V connector, and one EPS12V connector (permanently attached to the power supply).
• Video Card Power Connectors: Four six/eight-pin connectors in separated cables (modular cabling system).
• SATA Power Connectors: Six in two cables (modular cabling system).
• Peripheral Power Connectors: Six in two cables (modular cabling system).
• Floppy Disk Drive Power Connectors: Two.
• Protections: Over voltage (OVP), over power (OPP) and short-circuit (SCP, tested and working) protections. Although not listed by the manufacturer, this unit also has under voltage (UVP) and over current (OCP) protections.
• Warranty: Five years.
• Real Manufacturer: Highpower
• More Information: https://www.ocztechnology.com
• Average price in the US*: USD 105 – USD 129.

* Researched at Google Shopping on the day we published this review.