Prolimatech Armageddon CPU Cooler Review
Installation
Contents
Armageddon installation system is identical to the one seen on Prolimatech Megahalems Rev. B, which we tested some time ago. First you must attach two aluminum bars to the motherboard, screwing them to the backplate.
Figure 11: Aluminum frame.
After that you need to put the cooler in place and attach it to the frame, using a third aluminum bar.
Figure 12: Installed on the motherboard.
Then you install the fans, as you can check in Figure 13.
Figure 13: Fans installed.
In Figure 13, you can see the cooler inside our case.
Figure 14: Installed in our case.