Prolimatech Genesis CPU Cooler Review
Installation
Contents
Figure 12 shows the hardware used to install the Genesis on AMD systems. In Figure 13, you see the backplate and the nuts that go on the solder side of the motherboard on Intel CPUs.
Figure 12: AMD clip
Figure 13: Intel backplate and nuts
Figure 14 illustrates the holding bars installed on our motherboard. After this step, all you need to do is to put the cooler in place and attach two screws ona third bar that secures the cooler.
Figure 14: Holding system installed
In Figure 15, you can see the Prolimatech Genesis installed into our case.
Figure 15: Installed in our system