Thermalright Archon SB-E X2 CPU Cooler Review
Installation
Contents
Figure 10 shows the backplate for use with AMD processors (on the left), the backplate for Intel systems (at the center), and the frame that goes on the component side of the motherboard (on the right). At the bottom of the picture, you can see the transversal bar that goes over the cooler base and attaches to the frame. This bar has a screw at the center that allows the user to adjust the pressure over the CPU.
Figure 10: Backplates and holders
Figure 11 reveals the four spacers on the solder side of the motherboard. Those spacers are fastened to the backplate’s screws.
Figure 11: Spacers installed
Over the spacers goes the frame, shown in Figure 12.
Figure 12: Frame
Put the cooler in place, and attach it to the frame using the transversal bar with two screws. Use the included wrench to fasten the center screws that increases the pressure between the cooler and the CPU.
Figure 13: Heatsink installed
The last step is to install the fans, as shown in Figure 14.
Figure 14: Installation finished