Thermaltake Frio OCK CPU Cooler Review
Installation
Contents
Figure 12 shows the cooler base with clips attached to it and, in Figure 13, you see the backplate and the screws that go on the solder side of the motherboard.
Figure 12: Clips installed
Figure 13: Backplate and screws
After placing the backplate and the screws on the solder side of the motherboard, you need to install four plastic spacers and two metallic holders on the component side, as you can see in Figure 14.
Figure 14: Holding system installed
Then, screw the heatsink to the holders.
Figure 15: Heatsink installed
Finally, slip the cover over the heatsink and connect the fans to the motherboard.
Figure 16: Installed in our system