Thermaltake Litepower 450 W Power Supply Review
Transient Filtering Stage
Contents
As we have mentioned in other articles and reviews, the first place we look when opening a power supply for a hint about its quality, is its filtering stage. The recommended components for this stage are two ferrite coils, two ceramic capacitors (Y capacitors, usually blue), one metalized polyester capacitor (X capacitor, yellow component on the pictures below) and one MOV (Metal-Oxide Varistor). Very low-end power supplies use fewer components, usually removing the MOV and the first coil.
This stage is flawless, with two coils, one X capacitor (plus one after the rectifying bridges) and two Y capacitors more than needed.
Figure 7: Transient filtering stage (part 1).
Figure 8: Transient filtering stage (part 2).
In the next page we will have a more detailed discussion about the components used in the Litepower 450 W.