Titan Fenrir CPU Cooler Review
Installation
Contents
In Figure 12, you can see the installation hardware. The backplate at the top left of the image is intended to be used with socket LGA1366, and the right one fits sockets 775, AM3, AM2+, AM2, 939 and 754. For socket LGA1156 there is no backplate, you just need to pass four screws through the motherboard holes, and the use of this cooler with this kind of motherboard can bend the board. The H-shaped clip goes over the cooler base and fits all sockets.
Figure 12: Installation hardware.
In Figure 13 we see our socket LGA775 motherboard with the cooler supports installed. After that, you just need to put the cooler on the CPU, fitting the H-shaped clip over t
he base and attaching it with four thumbscrews. Fenrir is relatively easy to install and remains steady in place.
Figure 13: Socket LGA775 holders.
In Figure 14 we can see Fenrir installed on our motherboard.
Figure 14: Installed on the motheboard.
In Figure 15, you can see the cooler inside our case.
Figure 15: Installed in our case.