Tuniq Propeller 120 CPU Cooler Review
Installation
Contents
To install Propeller 120 you must use a backplate, shown in Figure 10. First of all, you need to insert the screws on the backplate holes that match your CPU socket. This backplate does not support socket LGA1156, but the manufacturer sells a compatible one.
Figure 10: Installation hardware.
It is curious that the holding system from Propeller 120 is identical to the one we found on iCEAGE Prima Boss II and Spire TherMax Eclipse.
Figure 11: Backplate with screws installed.
In Figure 12, you can see the cooler installed on our motherboard, with the fan already in place.
Figure 12: Installed on motherboard.
In Figure 13, you can see Propeller 120 installed inside our case.
Figure 13: Installed inside our case.