Xigmatek Aegir CPU Cooler Review
Installation
Contents
Figure 10 shows the backplate used to install the Aegir, with the screws in place.
Figure 10: Backplate
After installing the backplate on the solder side of the motherboard, you need to hold it with four thumbnuts and then install the bars as shown in Figure 11.
Figure 11: Holding mechanism
Next, put the cooler over the CPU and hold it with a third bar, which is screwed into the first ones.
Figure 12: Heatsink installed
Figure 13 shows the Aegir with the fan installed.
Figure 13: Cooler installed in our case