Xigmatek Dark Knight Night Hawk Edition CPU Cooler Review
Installation
Contents
Figures 10 and 11 show the installation of the holder frame on the motherboard. You must put the backplate on the solder side of the motherboard, and then attach the four thumbscrews from the component side. Afterwards, put the metal bars (each one has a screw at the center) in place, securing them with thumbnuts.
Figure 10: Thumbscrews
Figure 11: Metal bars
Then, put the cooler in place, holding it with a transversal bar.
Figure 12: Heatsink installed
The last step is to install the fan, as shown in Figure 13.
Figure 13: Installation finished