Zalman ZM-T3 Case Review

The Disk Drive Bays

The ZM-T3 has one 5.25” external bay, where the devices are held using conventional screws. Under this bay, there is a 2.5” internal bay. There are two internal 3.5” bays in a cage at the front panel, where the units are installed vertically, with the connectors facing down. Figure 13 shows those bays.

Figure 13: disk drive bays

There ia a 2.5” internal bay in the bottom of the case, ash shown in Figure 14.

Figure 14: bottom 2.5” bay

Behind the motherboard tray, there is another 2.5” bay.

Figure 15: additional 2.5” bay