Zalman ZM600-ST Power Supply Review
Overload Tests
Contents
Below you can see the maximum we could pull from this unit. If we increased one amp on any given output ripple/noise levels would get above the maximum allowed at +12 V (during this test noise level was around 118 mV).
| Input | Overload Test |
| +12VA | 25 A (300 W) |
| +12VB | 25 A (300 W) |
| +5V | 8 A (40 W) |
| +3.3 V | 8 A (26.4 W) |
| +5VSB | 3 A (15 W) |
| -12 V | 0.5 A (6 W) |
| Total | 654.4 W |
| % Max Load | 109.1% |
| Room Temp. | 46.8° C |
| PSU Temp. | 48.4° C |
| AC Power | 836.0 W |
| Efficiency | 78.3% |
| AC Voltage | 106.4 V |
| Power Factor | 0.980 |