3R System AK6-600M Power Supply Review
Main Specifications
Contents
The main specifications for the 3R System AK6-600M power supply include:
- Standards: ATX12V 2.3
- Nominal labeled power: 600 W continuous, 700 W peak
- Measured maximum power: 789.4 W at 43° C
- Labeled efficiency: 80 Plus Bronze, 82% minim
um at light (i.e., 20%) and full loads and 85% minimum at typical (i.e., 50%) load - Measured efficiency: Between 80% and 86.2%, at 115 V (nominal, see complete results for actual voltage)
- Active PFC: Yes
- Modular Cabling System: Yes
- Motherboard Power Connectors: One 20/24-pin connector and two ATX12V connectors that together form an EPS12V connector, permanently attached to the power supply
- Video Card Power Connectors: Two six/eight-pin connectors on two cables, modular cabling system
- SATA Power Connectors: Three on one cable, modular cabling system
- Peripheral Power Connectors: Three on one cable, modular cabling system
- Floppy Disk Drive Power Connectors: One
- Protections (as listed by the manufacturer): Over voltage (OVP), under voltage (UVP), over current (OCP), over power (OPP), over temperature (OTP), and short-circuit (SCP) protections
- Are the above protections really available? Yes
- Warranty: NA
- More Information: https://www.3rsys.com
- MSRP in the U.S.: NA
