Overload Tests
Contents
Below you can see the maximum we could pull from this power supply. If we tried to increase one amp at any given output, the unit would shut down, showing that one of its protections kicked in, which is always the desired behavior. During this test, the noise level at +12 V outputs was above the maximum allowed, at 155 mV, and voltages were below the minimum allowed, at +11.10 V.
| Input | Overload Test |
| +12VA | 28 A (336 W) |
| +12VB | 28 A (336 W) |
| +5V | 6 A (30 W) |
| +3.3 V | 6 A (19.8 W) |
| +5VSB | 2.5 A (12.5 W) |
| -12 V | 0.5 A (6 W) |
| Total | 609.4 W |
| % Max Load | 110.8% |
| Room Temp. | 34.2° C |
| PSU Temp. | 45.3° C |
| AC Power | 784.0 W |
| Efficiency | 77.7% |
| AC Voltage | 104.8 V |
| Power Factor | 0.994 |
