Aerocool LS-5200 case review
Conclusions
Contents
Figure 17 shows a complete PC built on the Aerocool LS-5200.
Figure
17: built
The Aerocool LS-5200 is roomy case, with nice look and excellent quality, focused on refrigeration: you can install up to three radiators, up to 360 mm on the front panel, up to 280 mm on the top panel, and up to 140 mm on the rear panel.
Being inexpensive for such a great case, we give it our Golden Award.
AeroCool Cases Aero-1000 Black Black
- Support ATX, MicroATX, MiniITX motherboard
- 2 x USB3.0 port, Audio and Mic Port
- Support long graphic card up to 410mm
- Support Water-cooling with top space reserved for radiator up to 240mm.
- Large Acrylic Side window for clear viewing
AeroCool Mid Tower Case with PWM Fan Hub and Watercooling Ready with USB 3.0, Black (P7-C1 Black)
- Intelligent PWM fan control board included with 7 led lighting colors & 4 led lighting mode selection
- Magnetic noise reduce board on top panel is easy to remove
- Large acrylic side window for clear viewing of chassis interior
- Pre-Drilled holes for cable management to reduce cable mess
- Sd & micro SD card reader included
Strong Points
- Excellent cost/benefit ratio
- Great construction quality
- Good internal space
- Air filter for the power supply and front fans
- Supports three 3.5” and four 2.5” devices (or up to seven 2.5” drives if the 3.5” bays are unused)
- A huge cutout in the motherboard tray for accessing the backplate of the CPU cooler
- Holes and a good clearance for routing cables behind the motherboard tray
- Supports up to three radiators
- Fan controller
- Eight expansion slots
- Left panel with transparent window
Weak Points
- Only one USB 3.0 port at the front panel
- Expansion slot covers are not reusable
Last update on 2026-05-20 at 19:30 / Affiliate links / Images from Amazon Product Advertising API