Antec High Current Pro 750 W Power Supply Review

Conclusions

The main specifications for the Antec High Current Pro 750 W power supply include:

• Standards: ATX12V 2.3 and EPS12V 2.92
• Nominal labeled power: 750 W
• Measured maximum power: 875.4 W at 44.8° C
• Labeled efficiency: Up to 92%, 80 Plus Gold certification
• Measured efficiency: Between 85.6% and 89.1%, at 115 V (nominal, see complete results for actual voltage)
• Active PFC: Yes
• Modular Cabling System: Yes
• Motherboard Power Connectors: One 20/24-pin connector and two ATX12V connectors that together form an EPS12V connector, permanently attached to the power supply, and one EPS12V connector on the modular cabling system
• Video Card Power Connectors: Two six/eight-pin connectors on one cable permanently attached to the power supply and two six/eight-pin connectors on one cable on the modular cabling system
• SATA Power Connectors: Nine on three cables, modular cabling system
• Peripheral Power Connectors: Six on two cables, modular cabling system
• Floppy Disk Drive Power Connectors: One
• Protections (as listed by the manufacturer): Over voltage (OVP), over current (OCP), over power (OPP), over temperature (OTP), and short-circuit (SCP) protections
• Are the above protections really available? Yes.
• Warranty: Five years
• Real Manufacturer: Delta Electronics 
• More Information: https://www.antec.com
• Average Price in the U.S.*: USD 170.00

* Researched at Newegg.com on the day we published this review.