Arctic Accelero Xtreme III VGA Cooler Review
How We Tested
Contents
We tested this VGA cooler with a Point of View GeForce GTX 460 card with 1 GB RAM. The GTX 460 GPU has a TDP of 160 W. In order to get 100% GPU usage, we ran the Folding@Home GPU client.
We compared the Arctic Accelero Xtreme III to the VGA stock cooler, the Arctic Accelero Twin Turbo II, the Gamer Storm Dracula installed with two Xigmatek XLF-F1453 fans (140 mm, 1,000 rpm), and to the Deepcool V6000 VGA cooler.
Room temperature measurements were taken with a digital thermometer. The core temperature was read with the SpeedFan program (available from the GPU thermal sensors). During the tests, the left panel of the case was closed.
The sound pressure level (SPL) was measured with a digital noise meter, with its sensor placed at the side of the case. We reduced the rotation of all the other fans so they wouldn’t interfere with the results. This measurement is only for comparison purposes, because a precise SPL measurement needs to be made inside an acoustically insulated room with no other noise sources, which isn’t the case here.
Hardware Configuration
- Processor: Core i5-2500K
- CPU Cooler: Thermaltake WATER2.0 Performer
- Motherboard: ASUS Maximus IV Extreme-Z
- Memory: 6 GB OCZ (DDR3-1600/PC3-12800), configured at 1,600 MHz and 8-8-8-18 timings
- Hard disk: Seagate Barracuda XT 2 TB
- Video card: Point of View GeForce GTX 460 1 GB
- Video resolution: 1920×1080
- Video monitor: Samsung SyncMaster P2470HN
- Power supply: Seventeam ST-550P-AM
- Case: Cooler Master HAF 922
Operating System Configuration
- Windows 7 Home Premium 64 bit SP1
Software Used
Error Margin
We adopted a 2°C error margin, meaning temperature differences below 2°C are considered irrelevant.