The Arctic Cooling Freezer XTREME Rev. 2 (Cont’d)
Contents
In Figure 8, you see the base of the cooler, made of copper. You can also observe the four heatpipes. The thermal compound comes preapplied on the base surface.
Figure 8: Base
Figure 9 reveals the 120 mm fan, which is easily removed from the heatsink. It uses a four-pin connector, thus supporting PWM speed control.
Figure 9: Fan
Figure 10 presents the heatsink without the fan, and here you can see the shape of the fins.
Figure 10: Fan removed
Leave a Reply