[nextpage title=”Introduction”]
The Z77 Extreme9 is the most high-end socket LGA1155 motherboard from ASRock targeted to the “Ivy Bridge” processors (third-generation Core i3, Core i5, and Core i7 processors). Let’s see what the ASRock Z77 Extreme9 has to offer.
The Intel Z77 is an upgraded version of the Z68 chipset with the same basic features (Intel Smart Response Technology and Virtu video switching technology), plus native support to four USB 3.0 ports. It also includes the addition of two new technologies: Smart Connect (allowing the computer to receive emails and refresh webpages while it is in sleep mode) and Rapid Start (faster boot times).
In addition, the ASRock Z77 Extreme9 supports the Virtu Universal MVP, which allows you to combine the performance of the integrated graphics processor available in the CPU with the performance of any video card installed. This is similar to what occurs with the Hybrid SLI and ATI Hybrid Graphics technologies, with the notable difference of not being limited to GPUs from a specific manufacturer.
ASRock has launched 11 different motherboard models based on the Intel Z77 chipset. In the table below, we compare their main specifications. Prices were researched at Newegg.com on the day we published this article, except for the Z77 Extreme9, which is the MSRP. The Z77 Professional, the Z77 Professional-M, and the Z77 Performance are part of the “Fatal1ty” series, coming with a special USB port with a higher polling rate for gaming mice.
Feature | Z77 Professional | Z77 Performance | Z77 Extreme9 | Z77 Extreme6 | Z77 Extreme4 | Z77 Pro4 | Z77 Pro3 |
Form Factor | ATX | ATX | ATX | ATX | ATX | ATX | ATX |
Memory Sockets | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
PCI Express x16 | 3 (x16/x0/x4 or x8/x8/x4) | 2 (x16/x4) | 6 (x16/x16/x0/x16/x0/x4 or x16/x8/x8/x8/x8/x4) | 3 (x16/x0/x4 or x8/x8/x4) | 2 (x16/x0 or x8/x8) | 2 (x16/x4) | 2 (x16/x4) |
PCI Express x1 | 1 | 1 | 1 | 1 | 2 | 1 | 1 |
Mini PCI Express | 0 | 0 | 1 | 1 | 0 | 0 | 0 |
Standard PCI | 2 | 2 | 0 | 2 | 2 | 3 | 2 |
CrossFireX | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
SLI | Yes | No | Yes | Yes | Yes | No | No |
SATA-300 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
SATA-600 | 6 | 2 | 6 | 4 | 4 | 4 | 2 |
eSATA-300 | 0 | 1 | 0 | 0 | 0 | 0 | 0 |
eSATA-600 | 1 | 0 | 1 (shared) | 1 | 1 | 0 | 0 |
USB 2.0 | 10 | 10 | 8 | 8 | 8 | 10 | 10 |
USB 3.0 | 8 | 6 | 12 | 6 | 6 | 4 | 4 |
FireWire | 2 | 0 | 2 | 2 | 0 | 0 | 0 |
Bluetooth | No | No | 4.0 | No | No | No | No |
Gigabit Ethernet | 2 | 1 | 2 | 1 | 1 | 1 | 1 |
Wi-Fi | No | No | 802.11a/b/g/n | No | No | No | No |
VGA | No | Yes | No | Yes | Yes | Yes | Yes |
DVI | No | Yes | No | Yes | Yes | Yes | No |
HDMI | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
DisplayPort | Yes | No | No | Yes | No | No | No |
Audio | ALC898 | ALC892 | ALC898 | ALC898 | ALC898 | ALC892 | ALC892 |
Voltage Regulator | 16+8 | 8+4 | 8+4 | 8+4 | 8+4 | 4+2 | 4+1 |
Price | USD 230 | USD 160 | USD 350 | USD 160 | USD 130 | USD 120 | USD 110 |
Feature | Z77 Professional-M | Z77 Extreme4-M | Z77 Pro4-M | Z77E-ITX |
Form Factor | microATX | microATX | microATX | Mini-ITX |
Memory Sockets | 4 | 4 | 4 | 2 |
PCI Express x16 | 3 (x16/x0/x4 or x8/x8/x4) | 3 (x16/x0/x4 or x8/x8/x4) | 3 (x16/x1/x4) | 1 (x16) |
PCI Express x1 | 1 | 1 | 1 | 0 |
Mini PCI Express | 0 | 0 | 0 | 1 |
Standard PCI | 0 | 0 | 0 | 0 |
CrossFireX | Yes | Yes | Yes | No |
SLI | Yes | Yes | No | No |
SATA-300 | 4 | 4 | 4 | 2 |
SATA-600 | 4 | 4 | 4 | 2 |
eSATA-300 | 0 | 0 | 0 | 1 |
eSATA-600 | 1 | 1 | 1 (shared) | 0 |
USB 2.0 | 8 | 10 | 10 | 6 |
USB 3.0 | 6 | 4 | 4 | 6 |
FireWire | 0 | 0 | 0 | 0 |
Bluetooth | No | No | No | No |
Gigabit Ethernet | 1 | 1 | 1 | 1 |
Wi-Fi | No | No | No | 802.11n |
VGA | Yes | Yes | Yes | No |
DVI | Yes | Yes | Yes | Yes |
HDMI | Yes | Yes | Yes | Yes |
DisplayPort | Yes | No | No | Yes |
Audio | ALC898 | ALC898 | ALC892 | ALC898 |
Voltage Regulator | 8+3 | 4+2 | 4+2 | 6+2 |
Price | USD 170 | USD 130 | USD 110 | USD 150 |
In Figure 1, you see the ASRock Z77 Extreme9 motherboard.
Figure 1: ASRock Z77 Extreme9 motherboard
[nextpage title=”Slots”]
The ASRock Z77 Extreme9 comes with five PCI Express 3.0/2.0 x16 sl
ots, one PCI Express 2.0 x16 slot, one PCI Express 2.0 x1 slot, and one Mini PCI Express slot.
Usually, on motherboards based on the Z77 chipset, only the first two PCI Express x16 slots are controlled by the CPU; the other PCI Express x16 slots are controlled by the chipset, operating at a lower speed (almost always x4) and only compatible with the 2.0 specification, which offers half of the 3.0 bandwidth. On this motherboard, however, thanks to the use of a PLX PEX8747 switch chip, five of the six PCI Express x16 slots are connected to the CPU, and are, therefore, compatible with the PCI Express 3.0 specification. However, “only” four of those five slots can be used at the same time. Keep in mind that the slots connected directly to the CPU will only offer PCI Express 3.0 bandwidth when an “Ivy Bridge” CPU is installed; with a “Sandy Bridge” model they will operate using the 2.0 specification.
The fourth PCI Express x16 slot (PCIE4) is controlled by the chipset, always works at x4 speed, and uses 2.0 bandwidth.
The ASRock Z77 Extreme9 supports the configurations listed below.
PCIE1 | PCIE2 | PCIE3 | PCIE4 | PCIE5 | PCIE7 |
– | x16 | – | x4 | – | – |
x16 | – | – | x4 | x16 | – |
x8 | – | x8 | x4 | x16 | – |
x8 | – | x8 | x4 | x8 | x8 |
If you want to install only one video card, you will need to use the second PCI Express x16 slot and not the first one, as it would be the most logical option. In addition, if you want to install two video cards, you must use the first and the fifth slots, so both can work at x16 speed.
When installing dual-slot video cards, you “kill” the slot immediately to the left (looking at the motherboard with its rear connectors facing up) of the slot being used. Even with this limitation, you will be able to install up to four dual-slot video cards on this motherboard. If a fourth dual-slot video is installed (in the sixth, i.e., PCIE7 slot), you will need a case with at least eight expansion slots.
The PCI Express x16 slots support both SLI and CrossFireX technologies.
Figure 3: The PLX PEX8747 chip
The Mini PCI Express slot comes with a Wi-Fi card supporting the IEEE 802.11b/g/n standards installed.
Figure 4: Mini PCI Express slot with the Wi-Fi card
In order to properly accommodate the additional PCI Express devices that are on this motherboard (the second Gigabit Ethernet port, the eight additional USB 3.0 ports, the four additional SATA-600 ports, the Wi-Fi card, etc.), the board makes use of a PLX PEX8608 switch chip. This chip automatically switches the available PCI Express lanes to the devices that need them. On motherboards with too many PCI Express devices without a switch chip, you need to manually disable devices on the motherboard setup in order to achieve full performance on devices connected to the USB 3.0 and SATA-600 ports when transferring files at the same time.
Figure 5: The PLX PEX8608 chip
[nextpage title=”Memory Support”]
Intel socket LGA1155 CPUs have an embedded memory controller, meaning that it is the processor, not the chipset, that defines what memory technologies you can have and the maximum amount of memory that is possible. The motherboard, however, may have a limitation as to how much memory can be installed.
The integrated memory controller from socket LGA1155 processors supports DDR3 memories up to 1,333 MHz (“Sandy Bridge” CPUs) or up to 1,600 MHz (“Ivy Bridge” CPUs). According to ASRock, the Z77 Extreme9 supports memories up to 3,000 MHz.
The ASRock Z77 Extreme9 has four memory sockets. Since DDR3 memory modules can be found in capacities up to 8 GB, you can have up to 32 GB with this motherboard if you use four 8 GB modules.
In order to enable the dual-channel mode, you must install two or four memory modules. When installing two memory modules, you will have to “skip” one memory socket. Unfortunately, the manufacturer used the same color for all memory sockets. So, when installing two memory modules, use the first and the third sockets, counting from the main power connector.
Figure 6: Memory sockets; install two or four modules for the best performance
[nextpage title=”On-Board Peripherals”]
The Intel Z77 chipset is a single-chip solution that is also known as a PCH (Platform Controller Hub). This chip supports two SATA-600 ports and four SATA-300 ports, supporting RAID (0, 1, 10, and 5).
The ASRock Z77 Extreme9 has four additional SATA-600 ports, controlled by two ASMedia ASM1061 chips (no RAID support).
One drawback is that the manufacturer used only two colors to identify the SATA ports: black for the SATA-300 and gray for the SATA-600. The manufacturer should have used different colors to identify to where each port is connected. The gray ports closer to the black ports are the two SATA-600 ports controlled by the chipset.
All SATA ports are located at the motherboard’s edge and rotated 90°, so video cards won’t block them. See Figure 7.
Figure 7: SATA-300 (black) and SATA-600 (gray) ports
This motherboard also has one eSATA-600 port, which is shared with the “SATA3_A4” port, so they can’t be used at the same time.
The Intel Z77 chipset supports 14 USB 2.0 ports and four USB 3.0 ports. The ASRock Z77 Extreme9 offers eight USB 2.0 ports, two soldered on the rear panel and six available through three headers located on the motherboard; and 12 USB 3.0 ports, eight located on the motherboard rear panel and four available on two headers located on the motherboard, near the main power supply connector. The eight additional USB 3.0 ports are controlled by two EtronTech E
J188H chips (one of the chips controls the four ports available on the two headers and the other chip controls four of the eight ports available on the rear panel). The motherboard comes with a 3.5” panel containing two USB 3.0 ports for you to use on one of the motherboard’s USB 3.0 headers if your computer case doesn’t have four USB 3.0 ports with internal connectors. It is very important to understand that this box comes with the antennas for the Wi-Fi card, so you must install it.
The ASRock Z77 Extreme9 has two FireWire ports controlled by a VIA VT6315N chip, one located on the motherboard rear panel and the other available through a header.
This motherboard supports 7.1+2 audio format, i.e., eight channels plus two independent channels for audio streaming. On this motherboard, the audio is generated by the chipset using the new Realtek ALC898 codec, which is an outstanding solution, providing an impressive 110 dB signal-to-noise ratio for the analog outputs, 104 dB signal-to-noise ratio for the analog inputs, and up to 192 kHz sampling rate for both inputs and outputs, with 24-bit resolution. This means you are able to capture and edit analog audio (e.g., converting LPs to CDs or MP3, converting VHS to DVDs or any other digital format, etc.) with this motherboard without adding any background noise.
The motherboard has on-board optical SPDIF output. A header labeled “HDMI_SPDIF1” also provides SPDIF output for you to install a coaxial SPDIF output or to route digital audio to older video cards that require this physical connection in order to have digital audio output in their HDMI connectors.
The analog audio outputs are independent only if you use a 5.1 analog speaker set. If you install a 7.1 analog speaker set, you will need to use either the “mic in” or the “line in” jacks.
The portrayed motherboard has two Gigabit Ethernet ports controlled by two Broadcom BCM57781 chips. These ports support the “teaming” function, which allows the two ports to be combined as one 2 Gbps port, if your network hardware supports this configuration.
In Figure 8, you can see the motherboard rear panel with a shared PS/2 keyboard/mouse connector, eight USB 3.0 ports, clear CMOS button, HDMI output, two Gigabit Ethernet ports, two USB 2.0 ports, one FireWire port, one eSATA-600 port, one optical SPDIF output, and the analog audio jacks.
Figure 8: Motherboard rear panel
[nextpage title=”Other Features”]
The ASRock Z77 Extreme9 has a POST diagnostics display that shows through a two-digit code which component is preventing the computer from turning on.
Figure 9: POST diagnostics display
The portrayed motherboard has a legacy serial port, which is available through a header labeled “COM1.” You will need to buy an adapter if you want to use this port. The portrayed motherboard also has an infrared interface, making it inexpensive for you to add an infrared sensor to be able to use a remote control or to connect devices using infrared technology (IrDA).
In Figure 10, you can see all of the accessories that come with the ASRock Z77 Extreme9.
[nextpage title=”Voltage Regulator”]
The CPU voltage regulator circuit of the ASRock Z77 Extreme9 has eight phases for the CPU main voltage (Vcc a.k.a. Vcore), two for the CPU VSA voltage (memory controller), and two for the CPU VTT voltage (PCI Express and DMI interfaces). Therefore, it uses an “8+2+2” configuration, which is incorrectly advertised by the manufacturer as “8+4.” The voltage regulator is controlled by an ISL6367 integrated circuit, using a hybrid design.
Figure 10: Voltage regulator circuit
The ASRock Z77 Extreme9 uses solid electrolytic capacitors manufactured in Japan. All coils on this motherboard are solid, ferrite-core models, which can provide up to 20% improvement in efficiency.
If you want to learn more about the voltage regulator circuit, please read our tutorial on the subject.[nextpage title=”Overclocking Options”]
The ASRock Z77 Extreme9 has a few overclocking options. Below, we list the most important ones (1.10 BIOS):
- Base clock: From 95 MHz to 150 MHz in 0.1 MHz increments
- CPU core voltage: From -0.300 V to +0.600 V in 0.005 V increments
- Integrated graphics processor (IGPU) voltage: From -0.300 V to +0.600 V in 0.005 V increments
- Memory controller (“System Agent,” VCCSA) voltage: From 0.925 V to 1.200 V in 0.089 V increments
- CPU VTT (“I/O”) voltage: From 0.768 V to 1.634 V in 0.009 V increments
- CPU PLL voltage: From 1.586 V to 2.349 V in 0.008 V increments
- Chipset (PCH) voltage: From 0.780 V to 1.646 V in 0.009 V increments
- Memory voltage: From 1.165 V to 1.800 V in 0.005 V increments
- Memory reference voltage: From -127 mV to +127 mV in 1 mV increments
Figure 12: Overclocking options
[nextpage title=”Main Specifications”]
The main specifications for the ASRock Z77 Extreme9 include:
- Socket: 1155
- Chipset: Intel Z77 Express
- Super I/O: Nuvoton NCT6776D
- Parallel ATA: None
- Serial ATA: Four SATA-300 ports, two SATA-600 ports controlled by the chipset (RAID 0, 1, 10, and 5), and four SATA-600 ports controlled by two ASMedia ASM1061 chips
- External SATA: One eSATA-600 port shared with one of the SATA-600 ports controlled by one of the ASMedia chips
- USB 2.0: Eight USB 2.0 ports, two soldered on the motherboard rear panel and six available through three headers on the motherboard
- USB 3.0: 12 USB 3.0 ports, eight soldered on the motherboard rear panel and four available through two headers on the mother
board (four controlled by the chipset and eight controlled by two EtronTech EJ188H chips) - FireWire (IEEE 1394): Two ports, one soldered on the motherboard rear panel and one available through a header on the motherboard, controlled by a VIA VT6315N chip
- On-board video: Yes, controlled by the CPU, HDMI connector
- On-board audio: Produced by the chipset together with a Realtek ALC898 codec (7.1+2 channels, 24-bit resolution, 192 kHz sampling rate, 110 dB SNR for the outputs, and 104 dB SNR for the inputs), on-board optical SPDIF output
- On-board LAN: Two Gigabit Ethernet ports controlled by two Broadcom BCM57781 chips, supporting “teaming,” and Wi-Fi supporting the IEEE802.11b/g/n standards
- Buzzer: No
- Infrared interface: Yes
- Power supply required: EPS12V
- Slots: Five PCI Express 3.0/2.0 x16 slots (see page 2 for configuration), one PCI Express 2.0 x16 slot (working at x4, all supporting SLI and CrossFireX), one PCI Express 2.0 x1 slot, and one Mini PCI Express slot (PLX PEX8747 switch chip, PLX PEX8608 switch chip)
- Memory: Four DDR3-DIMM sockets (up to DDR3-3000, 32 GB maximum)
- Fan connectors: One four-pin connector for the CPU cooler, one four-pin connector for an auxiliary fan, and three three-pin connectors for auxiliary fans
- Extra features: POST diagnostics display, legacy serial port
- Number of CDs/DVDs provided: One
- Programs included: Motherboard utilities
- More Information: https://www.asrock.com
- MSRP in the U.S.: USD 350.00
[nextpage title=”Conclusions”]
The ASRock Z77 Extreme9 is targeted to the sophisticated enthusiast, who wants to build a system based on an “Ivy Bridge” CPU with three or four video cards in SLI or CrossFireX mode and want all video cards to have the highest bandwidth with the CPU possible, i.e., accessed using the PCI Express 3.0 bandwidth, not the 2.0, and using at least x8 speed. This is possible thanks to the use of the high-end PLX8747 switch chip.
In addition, this motherboard is targeted to the user who understands the importance of the PEX8608 chip, another switch circuit from PLX. On motherboards with too many PCI Express devices without a switch chip, you need to manually disable devices on the motherboard setup in order to achieve full performance on devices connected to the USB 3.0 and SATA-600 ports when transferring files at the same time. This is especially important on this motherboard, as it has eight additional USB 3.0 ports, for a total of 12.
By the way, this is the first time we’ve seen a motherboard using both PLX8747 and PEX8608 chips at the same time.
Also noteworthy is the high-end audio codec used by this motherboard, the Realtek ALC898, which provides very high signal-to-noise ratios (110 dB for the outputs and 104 dB for the inputs), allowing you to use the on-board audio from this motherboard for professional tasks, such as audio editing.
In summary, if you are an enthusiast looking for the most “loaded” motherboard available for building the most high-end LGA1155 gaming machine possible, the Z77 Extreme9 is for you.
Of course, if you want to build a high-end system but are not obsessed with the actual bandwidth of the PCI Express x16 slots, you can pick a more affordable product.
Leave a Reply