Cooler Master Hyper 612 PWM CPU Cooler Review
Installation
Contents
In order to install the Hyper 612 PWM on our Intel CPU, the first step was to attach the clips shown in Figure 12 to the base of the cooler.
Figure 12: Clips installed
After that, all you need to do is put the cooler over the CPU, place the backplate on the solder side of the motherboard, and then screw four nuts, shown in Figure 13, to secure the cooler in place.
Figure 13: Backplate
Figure 14 reveals the cooler installed in our system.
Figure 14: Installed